Breaking: Warm October and Heavy Maintenance Strain PJM Grid to New Limits
Unseasonal heat and 70,000 megawatts of planned outages forced PJM to declare its first Capacity Advisory and Maximum Generation Alert from October 13 to 16.
By Adrian Romano ·

The fragility of the regional power grid became starkly apparent in mid-October when unseasonably warm weather collided with a heavy schedule of maintenance. The U.S. Department of Energy declared a power grid emergency across 13 states and the District of Columbia, granting PJM Interconnection temporary authority to keep the system stable from October 13 through October 16, 2026. Energy Secretary Chris Wright issued the order on Sunday, October 12, 2026, under section 202(c) of the Federal Power Act. This action was not taken to announce scheduled blackouts but to prevent interruptions during a period of extreme stress. No mandatory conservation orders were issued, and daily electricity use for households remained normal throughout the four-day window.
The primary driver of this near-shortage was the combination of warm October temperatures and the fall shoulder season. During this period, generator and transmission owners take equipment offline for maintenance and upgrades ahead of winter. Most scheduled outages are prohibited in summer, so these repairs are concentrated in the months surrounding the peak heat. On Friday, October 9, PJM issued a Capacity Advisory for the following Monday and Tuesday. This marked the first time the grid operator had ever used this specific procedure, which was endorsed by members in June 2026 for situations indicating an approaching capacity shortfall. The forecast showed peak demand of about 102,000 megawatts on Monday and 104,000 megawatts on Tuesday, all while approximately 70,000 megawatts of generation were already offline for planned work.
PJM’s senior manager for dispatch, Paul Dajewski, noted that this volume of outages is typical for the shoulder season, but the weather was not. On Monday, October 12, the operator issued a Maximum Generation Alert and a Load Management Alert for the next day. These alerts were issued after forecasting demand of approximately 111,500 megawatts or higher. A Maximum Generation Alert signals to transmission and generation owners that conditions will be tight, allowing them to defer or cancel maintenance. It also informs neighboring grid operators that exports from PJM may be curtailed. On October 13, PJM extended these alerts through October 14 and called on Demand Response programs to cut electricity use from participating customers.
The strain was exacerbated by transmission limits that bottlenecked generation in specific areas. Resources serving congested zones in Washington, D.C., Maryland, and Virginia, specifically the BGE, Pepco, and Dominion zones, could not move electricity as efficiently as usual. This physical constraint meant that even available power was difficult to distribute where it was needed most. The Department of Energy’s order allowed PJM to direct designated generation units to produce electricity and, in limited circumstances, to use backup power reserves. It also authorized the operator to call on generators to run in excess of their operating permits and to direct data centers and other large users onto their backup generation if necessary.
A significant factor in the current grid dynamics is the rapid growth of data centers. PJM states that the shoulder-season reprieve is not what it used to be because most new demand comes from energy-intensive large-load customers. Unlike residential or commercial usage, data center consumption does not fall with the weather. It is a 12-month, 24/7 phenomenon that is outpacing new transmission and electricity supply. This expanding baseline demand means that unseasonably hot or cold weather now arrives outside the traditional peak seasons, creating tighter margins than previous decades.
Federal officials and PJM emphasized that the emergency order was a preventive measure. The operator had previously used Department of Energy emergency orders during two unseasonably warm periods in September 2026. In those instances, PJM also deployed Demand Response and had to cover net load as solar output fell faster than electricity use after sunset. The recent October events highlighted how quickly the system can approach its limits when maintenance schedules overlap with weather anomalies. The order allowed for the deployment of auxiliary, standby, battery storage, or other generation resources at data centers, including hyperscaler facilities, and at other large industrial and commercial sites.
As of the PJM Winter Outlook released on November 5, 2026, the operator expects sufficient resources to reliably meet demand this winter under expected conditions. However, reserve margins continue to tighten as demand outpaces new supply. PJM projects 182,426 megawatts of operational capacity to serve a forecast winter peak of approximately 147,500 megawatts, plus about 3,200 megawatts of average exports to neighboring systems. If reached, that peak would set a new winter record driven largely by the growth in data center demand.
Reliable winter operations depend on strong generator performance during extreme cold, particularly in areas where transmission constraints limit deliveries. Michael Bryson, PJM’s senior vice president of operations, stated that the goal is to coordinate operations with generation and transmission owners to proactively manage the system. He emphasized the need for the grid to perform at high levels when consumers need energy the most. The recent October emergency serves as a clear indicator of the operational challenges facing the region as the winter season approaches.






